7410 John Deere with power quad transmission

7410 John Deere with power quad transmission Problems

Problems: 7410 John Deere with power quad transmission. I have had it work in reverse and it sometimes works. It could be clutched again and worked. I then let it idle and tried reverse 2 to 3 times to get it working. When it works, it doesn’t slip. All speeds forward are perfect. Today, i tried again. The only way I could get to work was to let the engine idle and then release the clutch halfway.

Support: 7410 John Deere with power quad transmission

Reverse engagement could be affected by a number of factors. Most of these issues relate to the Forward/Reverse Shift Valves. Broken springs on the forward/reverse switch valve are the most common cause for reverse engagement loss. The forward/reverse changing valve is located in the housing at the bottom power quad. Below I have attached a detailed diagram of the valve housing which shows the #8 shuttle vale.

7410 John Deere with power quad transmission 2
7410 John Deere with power quad transmission

One of the springs can break, causing the engagement to be delayed. In this case the engagement can become very aggressive. This is the cheapest repair as the lower chamber can be removed.

The bottom of your power quad contains a shift valve. This control forward and reverse as well the four powershift gears. A spring can often break, causing floating pieces to stop normal modulation. You will lose the direction you are moving more often than not. Loader tractors are most likely to experience this problem because they have more forward reverse motion.

The valve housing is easily accessible. The driveshaft must be first removed. The three deferent bolts holding the valve housing down towards the bottom power quad are called the “deferent length bolts”. You’ll also see that the two bolts feature the copper sealing washers, #9 in the diagram. It is critical that the spool house is not damaged or otherwise compromised. Make sure that the #25 quad detent (power-quad detent) is in perfect condition.

The replacement gasket can be purchased as full plates, which include both gaskets.

7410 John Deere with power quad transmission 3
7410 John Deere with power quad transmission

This is where you should start. These three springs and center spools are identical, making it easy for you to see if there is any damage. The three valves used to control the powershift speeds are Reverse, Froward and Enable Pressure spool. The other spool holds four powershift speeds.

John Deere 7410 tractor Repair Tips

  1. Dealerships can be more expensive than independent garages and mechanics. If your tractor was purchased recently, you might be eligible for a discount from your dealer. However, you should not make it a habit to visit your dealership if their prices are too high. Instead, look for independent garages that have a great reputation.
  2. It doesn’t matter what reason you had for your tractor to be fixed, it is important that you keep a record of it. This will be helpful to the technician when it comes time for future repairs on your John Deere 7410. You may have to pay more for diagnostic work if you don’t have these records.
  3. Make sure that the mechanic you are taking your tractor to has the appropriate licenses and credentials. Check their online reviews and the Better Business Bureau standing before you make an appointment. Look beyond the positive reviews to see how they respond to criticisms. It is inevitable that every business will have a problem at some point. If they address the issue quickly and professionally, it may be worth another look.
  4. When working with the tractor’s fuel system, be sure to exercise the utmost caution. Do not work near fuel tanks, fuel lines, or pumps that have ignition sources such as cigarettes or any other items that could spark a spark. Protect yourself with fuel-resistant gloves, eyewear and wipe down any fuel spillages immediately.
  5. Before you attempt a 7410 John Deere with power quad transmission repairs for the first time, make sure to check out a number of sources. Before you attempt the repair, do a thorough online search and watch instructional videos. Once you are comfortable with the idea, you can make a list of all the items you need and the steps that you will need to complete the repair.
  6. Your business card for tractor repair shops should be kept in your JD. Your John Deere 7410 with power quad transmission could be in trouble. It’s a good idea to have the number of your favorite tractor shop handy in case something goes wrong. You can also program all their contact information into your phone.
  7. Don’t let the idea that your tractor needs a tune up be your trap. Each tractor is unique, so the manufacturer will tell you when to bring your JD in. This schedule will ensure that your John Deere 7410 runs well.
  8. Don’t fall for the “free oil changes” scam. This trick is used to convince you that your tractor needs to do unnecessary things. Low-quality oil is most commonly used, which is bad for your JD. Use the oil that the manufacturer recommends.
  9. When you visit a tractor shop for repairs, make sure you have your owner’s manual. You should verify that the service you are being offered is correct. If not, tell them that you are declining that service.
  10. The tips you just read will help you next time your John Deere 7410 needs to be fixed. Do not be intimidated by tractor repair costs and complexities. Learn more about your JD and the most common issues. Find out who the reliable dealers are.
John_Marvin
JD Farm Supplies
Add a comment